An ESP32 based plane radar for my desk

This project made for a perfect lazy Saturday unwind, after a busy week giving a talk at Devrelcon in NYC. Makerworld had this thing as one of their featured models about a week or two ago, and the parts came in while I was away. GitHub repository ESP32-Plane-Radar Open-source ESP32 firmware for a 1.28″ round display that shows live ADS-B aircraft around your location as a sonar-style plane radar. by ironicbadger · C++ · MIT View repository on GitHub ★ 0 ⑂ 0 ↗ Plane radar is a neat little project that turns an ESP32-C3 and a 1.28-inch round display into a live aircraft radar. It pulls nearby ADS-B traffic, plots each aircraft , and shows the details directly on the screen. It was an easy build, although it did require a little soldering. I always enjoy doing that as it reminds me of my days building racing drones. Thin, silicone based wires made quick work of the cabling. And after about 15 minutes, we were ready to go. It is insanely easy to flash firmwares to a fresh esp32 these days using the browser-based ESPHome web flashing tool. Under 30s and you’re done. A quick note about the 3d model The original model was featured on Makerworld, because it looks great. Reality though was, in practice, it’s not actually that great. MW MakerWorld 5.4Klikes 3.3Kdownloads 15.1Ksaves 2.4Kmakes Original 3D model ESP32 Plane Radar Live ADS-B on a Round Display by matixovi · Published May 31, 2026 View model on MakerWorld ↗ Unfortunately the tolerances are just too tight to be usable with the batch of boards I got. So I’m likely going to model my own replacement at some point, but for now I ended up printing this model instead. MW MakerWorld 154likes 194downloads 470saves 102makes Original 3D model ESP32-S3 1.28" Waveshare Plane Radar by ThePrintableWatch · Published Jun 10, 2026 View model on MakerWorld ↗ Customising the firmware I’ve spent today improving my fork of ESP32 Plane Radar project, with the help of pure vibes. The biggest improvement is proper flight context. Where the data is available, aircraft now show their origin and destination instead of just their tail number, with the callsign used as a fallback. Aircraft types are also more descriptive, something like B737-800 rather than simply B737. I added local weather, temperature, humidity, time and date as well. The web interface can now modify coordinates after initial setup. Display options can now be changed without resetting the Wi-Fi configuration, and there are controls for units, runways, weather, temperature format and 12/24-hour time.